tcwire

"The tagline used by Unified, Uniting the Benefits - Delivering the Quality, aptly describes the mission behind our member companies banding together," states Tom Lentsch, CEO of Unified Screening & Crushing. "While the purpose of Unified Screening & Crushing is to bring together all the resources of the member companies, each individual company will remain intact. The real benefits are found in our services to our customers. Unified customers will enjoy access to an extensive knowledge, experience and inventories to meet all their screening and crushing needs for both standard and unique applications - no matter where they are geographically located."

American Screen & Crusher
A Unified Screening & Crushing Distributor
(205) 999-3607
ascleigh@bellsouth.net
Url:  http://www.chinacuttingmachine.com/
       http://www.swanwashing.com/

dantco

As a leader in dispersing and mixing technology, Dantco Mixers offers a large selection of laboratory-scale and large production dispersers and mixers to provide reliable performance for each and every application. These dispersers and mixers may be supplied post mounted or tank mounted with mechanical drives or electronic drives (DC or AC Variable Frequency Inverter) or hydraulic drives with standard controls or explosion proof controls.

Dantco is able to specify and supply a full line of Mixers, Dispersers, Agitators, Stator/Rotor Homogenizers. They can be tank mounted or post mounted, variable or fixed speeds, single or multishafts. Ribbon Blenders (horizontal or vertical) and Paste Mixers may be entered on special orders.These units can be supplied TEFC or explosion proof, AC fixed or variable frequency motors and controls, and variable speed hydraulics, in sizes ranging from fractional HP to 200 HP.

Dantco is also able to supply most sizes of process and storage tanks, including portable on wheels and on lift tubes for fork lifting, stackable, with mill or polished finish inside and outside. Available in carbon steel and stainless steel, they can also be supplied as jacketed tanks (pocket or half pipe) for cooling or heating and when supplied with proper seals and gaskets able to support low level vacuum/pressure.

The key feature of Dantco products is the simplicity of design which helps keep down cost. Off the shelf, highest quality components are used throughout. Motors, pulleys, belts, bearings, ball valves, butterfly valves, hydraulics, instruments and controls are all standard components, which are readily available either at Dantco stock or at any power/process equipment and electrical dealers in your area.

Dantco’s engineering and production departments are committed to offering custom design, the most competitive prices in the industry, 2-year warranty on parts and labor and trying hard to outperform our customers’ expectations. On time delivery, field service and preventive maintenance on our (or our competitors’) equipment complete the basis of Dantco quality and reliability.

Dantco has been servicing the coatings, chemicals, pharmaceuticals and cosmetics industries since 1968. We invite you to browse our web site and we welcome your specific inquiries which will receive our immediate and best attention.

Write, call or send us email. Or, fill out the information request form below and we will respond promptly.

Address: Dantco Mixers Corporation
9 Oak Street
Paterson, NJ 07501-3013
Phone: 973-278-8776
Fax: 973-278-1538
Email: sales@dantco.com
Url:  http://www.crushingplant-china.com/
       http://www.chinacuttingmachine.com/

mile-x

Mile-X Equipment, Inc. is a distributor of automotive/bus/truck tools and equipment including: lifts, floor jacks, tire changers, wheel balancers, filter crushers, air compressors and more. Since 1979, Mile-X has focused on providing prompt customer service at reasonable prices. The items you see on our site are a small representation of what we can provide. Check out the "Supplier Link" button on the left to view some of our supplier's web sites. If you are looking for a particular model number, certain manufacturer, or you are just looking for some answers, please give us a call at 800-837-3818 or 419-678-3818. Our hours are 8:00 a.m. to 5:00 p.m. Eastern Standard time.


Contact Us
Customer Service Representatives M-F 8:00 am-5:00 pm EST
Company Headquarters:
Mile-X Equipment, Inc.
801 N. 2nd Street
Coldwater, OH 45828
Coldwater is located near the Indiana border, 2 hours north of Cincinnati and 2 hours south of Toledo.
Phone:
1-800-837-3818
1-419-678-1442
1-419-678-3818
1-419-678-8091
1-419-763-5818
Fax:
1-419-678-2489
Email
sales@mile-x.com
Url:  http://www.swanwashing.com/
       http://www.crushingplant-china.com/

prescotthats

Prescotthats.com is an extension of our brick-and-mortar store, Puttin' on the Hats, in beautiful Prescott, Az, where we have been selling hats since 1990.

We offer all sorts of hats and caps and are constantly adding new styles.

106 S. Montezuma
Prescott AZ 86303
USA
(928) 776-1150
Url:  http://www.chinacuttingmachine.com/
       http://www.swanwashing.com/

tinsleycompany

We have been in business since 1978, selling in Texas, Oklahoma, Louisiana and portions of Mississippi.

Tinsley Company
P.O. Box 9883
College Station, TX  77842
Phone: 979-217-1480
Fax: 866-406-1928
Url:  http://www.crushingplant-china.com/
       http://www.chinacuttingmachine.com/

ampcrushers

Who is AMP?
The principals of AMP, LLC and Megapartes Costa Rica AMP S.A. are relative new comers to the aggregate industry. The company was started in Las Vegas, Nevada by the owner after years spent working in the industry for other equipment dealers. The mandate for our new company was simple; provide better service, at a fair price.
In 2008, a new store was opened to serve the Central American market. Based in San Jose, Costa Rica, this branch is making in-roads into the Aggregate Industry in Panama and Costa Rica. Plans for 2009 include a new partnership in Mexico with Kaufman Equipos S.A.B. de C.V.

Office Hours: 8 AM - 6PM PST M-F
Email: Info@Ampcrushers.com
United States
Aggregate Mining Products
4939 West Ray Road
Suite 161
Chandler, AZ
85226
Telephone:
Arizona Office: (602) 315-4285
Nevada Office: (702) 491-5841
Fax: (480)753-0527

naessens-hydraulics

Welkom op onze site, U bent op het juiste adres, wij zijnUw gespecialiseerde partner in het ontwikkelen en realiseren van totaaloplossingenvoor de recyclage industrie, wegenbouw, grond- en afbraakwerken, afvalrecyclage, compostindustrie, houtrecyclage en grondverbetering en sanering.

Onze passie is om onze klanten te helpen groeien door hen te voorzien van de beste oplossingen, machines en installaties om opde meest economisch en een ecologisch manier te recycleren en zo een meerwaarde te creeren voor hun bedrijf en ook voor alle betrokken partijen.

Door de directe samenwerking van onze eigen engineering met onze klanten slagen wij erin steeds innovatieve oplossingen te bieden voor de hedendaagse uitdagingen met betrekking op duurzame recyclage en herwaardering van diverse afvalstromen.

Daarvoor werken wij uitsluitend samen met vooraanstaande fabrikanten die instaan voor het leveren van hoogstaande kwaliteit en permanente service.

Op deze site kunt U een kennismaken met ons ruim gamma van vaste en mobiele zeefmachines waaronder de vlakdekzeven, trommelzeven, windzeven, complete wasinstallaties en ook ons uitgebreid gamma aan vaste en mobiele brekers waaronder Kaakbrekers, Percussiebrekers, Conebrekers en VSI brekers.

Verder beschikken wij over onze eigen onafhankelijke ontwikkelings- productie- en service afdelingen in onze kantoren en werkhuizen te Oosterzele om zo onze klanten permanent van dienst te kunnen zijn.

Lange Ambachtstraat 9
Tel.: 0032.09.362.88.09
9860 Oosterzele
Fax.: 0032.09.362.32.07
info@naessens-hydraulics.be
Url:  http://www.chinacuttingmachine.com/
       http://www.swanwashing.com/

kpijci

KPI-JCI was formed in 1997 when long-time industry leaders Kolberg-Pioneer Inc. and Johnson Crushers International Inc. consolidated their sales forces and product lines into a single brand. Together they create the world’s broadest selection of rock crushing and screening equipment for the aggregate, mining and paving industries.

Kolberg-Pioneer Inc. (KPI) located in Yankton, South Dakota, manufactures aggregate processing equipment: sand classifying-washing, conveyors, screening plants and portable and stationary crushing plants for hard rock and recycle applications.

Johnson Crushers International Inc (JCI) located in Eugene, Oregon, specializes in roller bearing Cone Crusher, horizontal screens as well as portable, stationary and track mounted plants.

KPI-JCI and Astec Mobile Screens Marketing
Lisa Carson – Marketing Manager
700 West 21st Street
Yankton, SD 57078
Phone: 605-668-2555
Email: lisacarson@kpijci.com
Url:  http://www.crushingplant-china.com/
       http://www.chinacuttingmachine.com/

goodwinbarsby

Goodwin Barsby was established in 1871 and quickly gained a reputation as a manufacturer of rugged and reliable stone Crushing Machinery.
Goodwin Barsby received 3 Queens Award for Export Achievement in 1966, 1970 & 1973 in recognition of their worldwide sales achievements.
In 1982 a management buy-out led by Mr D.I.Sydenham returned the business into private hands. Following a very successful period of trading the company was purchased by Boliden-Allis in 1989, and then later acquired by Svedala Arbra and then subsequently Metso Minerals during the Nordberg / Svedala merger in 2001.
Goodwin Barsby was again returned to private hands in 2004 after being acquired by CMS Cepcor, Europe’s largest aftermarket supplier of Crusher, Screen & Asphalt Plant Spares and Service again led by Mr D.I Sydenham and Mr M.Weare.
Thousands of classic build Goodwin Barsby are still operating worldwide and discerning owners of Goodwin Barsby equipment will appreciate its rugged and reliable design that provides unrivalled life cost savings against machines of lighter construction.
In 2010 we launched a range of rugged & reliable Goodwin Barsby Mark 5 Series Single Toggle Mobile Jaw Crushers to compliment our range of Vibrating Grizzly Feeders, Vitex Vibrating Screens and Granulators.

Goodwin Barsby
Crusher Manganese Steels Limited
Vulcan Way
Hermitage Industrial Estate,
Coalville,
Leicestershire,
United Kingdom
LE67 3AP

Tel: +44 (0) 1530 817000
Fax: + 44 (0) 1530 817111
Url:  http://www.swanwashing.com/
       http://www.crushingplant-china.com/

sbm-mp

We…

... supply premium Austrian quality that customers can rely on.

... offer holistic solutions by providing a comprehensive range of products.

... understand our customers’ needs, and are quick to respond to them.

... create resources to strengthen out sales organization and market penetration.

... utilize human power to ensure that everyone can do their best.

... ensure the reliability and availability of machines throughout their service lifetime.

... organize our operations to stay lean, and thus flexible.

... assume responsibility for our staff.

... ask much of ourselves and our products – this is something a customer can rely on.

... are team players, because it takes teamwork provide optimum services to our customers.

... focus on adding value to our products.

... supply premium quality, and need highly-skilled staff to do so.

... wish to be successful, and all our staff – from the trainees to senior management – play a role in achieving success.

SBM Mineral Processing GmbH
Arbeiterheimstraße 46
A - 4663 Laakirchen
Tel: +43 (7613) 2771-0
Facsimile: +43 (7613) 2771-359
E-Mail: office@sbm-mp.at
Url:  http://www.chinacuttingmachine.com/
       http://www.swanwashing.com/

pilotcrushtec

Pilot Crushtec started out in 1990 manufacturing Tornado VSI crushers. Chief executive officer, Sandro Scherf, who studied sales and marketing managment, joined his father in an engineering jobbing shop in 1985. “We were manufacturing crushers for a European company and when payments became an issue, we cut ties with them. We were left with a large stockholding of crushers and no customer and decided to try and sell the mobile impact crusher. It became apparent quickly that there was more money to be made in selling the equipment than in manufacturing it and we sold the jobbing shop and started Pilot Crushtec,” he said.

“We got into exports early on and still export to our first export customer. Incidentally, this customer started building a crusher called a Rubble Master and they are now one of the world’s leading manufacturers of recycling impact crushers. “At that stage we weren’t sure where we were going to go,” he said. “When Nelson Mandela was released in 1990, the stone crusher market was dead. However, we were very, very optimistic, and despite warnings from our competitors about the market being too small for a second player, we tied up with Finlay Hydrascreens in 1993. Within four months we had sold three machines and by the end of that year, we had sold 12, doubling our original expectations. The Terex Finlay product has grown to be the leading brand in mobile screening,” Scherf confirms.

Exports form a major part of the company’s business, and Pilot Crushtec won back-to-back merit awards in the State President’s Awards for Export Achievement in both 1993 and 1994.

Pilot Crushtec’s approach of continuous development is supported by its vision of added value services. It has an unlimited research and development budget.

In 2004, the company implemented internal restructuring designed to streamline and centralise customer service through the newly established parts division, PartsLink, which supports its product support initiative, SupportLink. These divisions fall under direct management of the sales division and are designed to co-ordinate the respective functions to create greater synergy and improve accountability and customer service.

Pilot Crushtec (SA) (Pty) Ltd
Reg. No: 2005/002689/07VAT. No: 4560218465

Physical address: 26 Yaldwyn Road Witfield / Jet Park Boksburg South Africa Postal address: P.O. Box 30032 Jet Park 1469 South Africa

GPS Coordinates: S 26°10.335´ E028°13.085´


Contact numbers:

Tel: +27 11 842 5600 SupportLink (24 hr Standby): +27 82 944 9028
Fax: +27 11 842 5610 PartsLink (24 hr Standby): +27 82 944 9026
InstalLink (24 hr Standby): +27 82 758 3248
Url:  http://www.crushingplant-china.com/
       http://www.chinacuttingmachine.com/

qmsupplies

Genuine Alternative to your Original Equipment Manufacturer
Quarry Manufacturing & Supplies Ltd (QMS) are Europe’s premier manufacturer of aftermarket wear parts and crusher spares, supplying a high quality premium service to the quarry, mining, recycling and demolition industries. We are recognized around the world for our product knowledge, engineering know-how and outstanding customer support.
Since forming in 1980 QMS has quickly grown to its current position by combining both the highest quality engineering standards with genuine value for money. QMS keep all key manufacturing processes inhouse enabling strict quality assurance on all its crusher wear and spare parts coupled with a prompt delivery schedule.

Quarry Manufacturing & Supplies Ltd
Grange Road, Bardon Hill
Coalville
Leicester
LE67 1TH
United Kingdom
Tel: +44 (0)1530 811 081 | Fax: +44 (0)1530 510 960
Url:  http://www.swanwashing.com/
       http://www.crushingplant-china.com/

tesab

TESAB ENGINEERING IS THE CRUSHING DIVISION OF THE TESAB GROUP AND SPECIALISE IN HORIZONTAL IMPACT CRUSHERS AND JAW CRUSHERS.
Tesab engineering product and service offering provide value through innovation and a commitment to the highest standards of build quality. With manufacturing based in areas rich in engineering pedigree, and in particular the mineral processing industry, allows access to the very best people, for skill and knowledge. The Tesab Group are committed to investing in its people; its most valuable resource through constant training and investment.

Tesab Enginering Ltd,
Gortrush Industrial Estate,
Omagh,
County Tyrone,
Northern Ireland,
BT78 5EJ

Tel: [0044] 028 82 252781
Fax: [0044] 028 82 252801
General Email: sales@tesab.com
Url:  http://www.chinacuttingmachine.com/
       http://www.swanwashing.com/

ACROSS THE GLOBE

For details of the TESAB Group's international offices please visit the Dealer Network.

tclawrence

To provide highest quality, porous free castings at the best possible prices. All castings manufactured from "CERTIFIED INGOTS", guaranteeing casting integrity. Complete testing/inspection available, including chemical and physical analysis, plus X-ray and ultrasound - with certificates.

SAVE MONEY


BY BUYING PARTS ALREADY CAST TO BASIC SHAPE & SIZE , with a typical 3/16" material cleanup - MACHINE ONLY THE FITTING AREAS - 30 % to 60% less machining time and excess material stock costs, as opposed to common bar stock.

460 Dobbie Drive, Cambridge Ontario, N1T 1S7 CANADA Tel: (519) 621-8730 Fax:(519) 622-3730 Email: bbacii@sympatico.ca
STOP GIVING YOUR PROFITS AWAY IN THE FORM OF MACHINE TURNINGS. ( ie: flanged bushings, hubbed gears )


460 Dobbie Drive, Cambridge Ontario, N1T 1S7 CANADA
Tel: (519) 621-8730
Fax:(519) 622-3730
Email: bbacii@sympatico.ca
Url:  http://www.crushingplant-china.com/
       http://www.chinacuttingmachine.com/

kurtzcrushers

Baker Kurtz provides its customers with the highest quality equipment that is second to none. They also receive unmatched service backed with our performance guarantee. We believe that you cannot buy better equipment for more money!

Mailing Address
Baker Kurtz
1010 Ipsen Road
Belvidere IL 61008
Phone
815 332 1600
Fax
815 332 1601
Url:  http://www.swanwashing.com/
       http://www.crushingplant-china.com/

dspprerov

We believe that it is possible to produce top quality products for commonly acceptable prices. We are convinced that an effort of each of us contributes to achieve this target. Therefore, we believe to ourselves and one another and therefore, we also believe our customers.

DSP Přerov, spol. s r.o.
Kojetínská 2900/51
751 52 Přerov I - Město
The Czech republic
(show on map)

GPS:49°26'40.687"N, 17°26'19.702"E

phone/fax: +420 581 209 051
cell: +420 581 209 050
e-mail: dsp@dspprerov.cz
web:  http://www.chinacuttingmachine.com/
         http://www.swanwashing.com/

thunderbird2

Our Mission: Aggregate Machinery, Inc. exists to provide customers in the aggregate material handling and recycling industries with quality machinery and specialized designs to consistently provide the best performance, efficiency, reliability and durability.
Aggregate Machinery is a corporation dedicated to crushed stone, recycling, and the sand and gravel industries. Its functions include design, plant layout, and manufacturing. Aggregate Machinery, Inc. builds the Thunderbird II line of equipment and uses many manufacturer's equipment under an O.E.M. arrangement.

We believe that no one manufacturer builds all of the best equipment for a specific rock producer's or recycler's needs. Therefore, Aggregate Machinery makes an unbiased analysis of each need and assembles the best equipment available regardless of manufacture.

We specialize in design and application -- the right product and the right flow plan to accomplish your particular job. A great number of our plants are designed to the customer's specifications giving us the ability to better serve our customer's needs. Our design team is experienced in designing some of the best portable and stationary aggregate plants money can buy.

Aggregate Machinery, Inc
3575 Blossom Dr NE
Salem, OR 97305
Telephone: 503-390-6284
Fax: 503-390-6342
Url:   http://www.crushingplant-china.com/
        http://www.chinacuttingmachine.com/

tibe

All information is given in good faith and belief. Should there still be a mistake, we deplore this, for this case but cannot accept any liability.
We are not responsible for external contents to which we refer by hyperlinks.
We also note that we change our information service for updatig reasons.
The content of this sites is protected by copyright. The information is intended for personal use. Any other use, in particular saving in databanks, publication, duplication and any form of comercial use, and disclosure to third parties - in parts or in revised form - without the consent of TIBE cominution technology GmbH. is forbidden.
We are not liable for any direct or indirect damages, including lost profit, resulting from or otherwise connected with the information provided on this website.
For availability, accuracy or completeness of the content of the data no warranty is given. Positive reporting is allowed and encouraged.
For statistical purposes, access information is stored and utilized. Personal data are not collected or stored.
Hyperlinks are http://www.tibe.at are welcome. We request, however, not to integrate individual pages of our website on other strange sites.
The TIBE crushing GmbH. assumes no liability for the accessibility of our sites or the quality of access, particularly access times, and the manner of presentation.
We point out that the display options are system dependent. This also means that the representation of Web pages is not possible on any system.


Operator:

TIBE Zerkleinerungstechnik GmbH
Piesing 21
4846 REDLHAM
Austria

FN 223926 d
Gerichtsstand Wels
UID-Nr. ATU 54579308

Technical implementation:

Syreta gmbh e-business solutions
Maria Theresia Straße
A - 4600 Wels
http://www.swanwashing.com/
http://www.crushingplant-china.com/

qmsupplies

Quarry Manufacturing & Supplies Ltd (QMS) are Europe’s premier manufacturer of aftermarket wear parts and crusher spares, supplying a high quality premium service to the quarry, mining, recycling and demolition industries. We are recognized around the world for our product knowledge, engineering know-how and outstanding customer support.
Since forming in 1980 QMS has quickly grown to its current position by combining both the highest quality engineering standards with genuine value for money. QMS keep all key manufacturing processes inhouse enabling strict quality assurance on all its crusher wear and spare parts coupled with a prompt delivery schedule.

Quarry Manufacturing & Supplies Ltd
Grange Road, Bardon Hill
Coalville
Leicester
LE67 1TH
United Kingdom
Tel: +44 (0)1530 811 081 | Fax: +44 (0)1530 510 960
Please complete the form to the left for any enquiries regarding parts, maintenance and repair work.
If you prefer, call us now on +44 (0) 1530 811 081
Url:  http://www.chinacuttingmachine.com/
       http://www.swanwashing.com/

trioproducts

TRIO products employ the most current design and technical expertise. Innovative engineering, advanced geometry, and superior manufacture yield a range of durable, productive, highly-efficient, and cost-effective aggregate and mining equipment.
TRIO's machines are built for easy maintenance and a long working life in the most extreme conditions. All TRIO products are backed by the company's one-year warranty and continuing service commitment.

Now is the time to find out what TRIO can do for you.

Jock Voelzke
Regional Sales Manager / Equipment Sales
Phone: 1 (503) 367-6442

Melanie Lorenzo
Equipment Parts
Phone: 1 (626) 851-3966
Url:  http://www.crushingplant-china.com/
       http://www.chinacuttingmachine.com/

lippmann-milwaukee

Since its formation in 1923, Lippmann Milwaukee, Inc. has continuously designed and manufactured quality aggregate processing equipment.

The company began as Lippmann Engineering Works, and the design of heavy-duty Jaw Crushers became the cornerstone of the Lippmann Product Line.

Today, Lippmann continues to build the heaviest and most reliable Jaw Crushers on the market, along with its expanded line of proven aggregate processing equipment designed to increase productivity and reduce costs.

Our products include a complete line of Primary Jaw Crushers, innovative Primary and Secondary Impact Crushers, Vibrating Grizzly Feeders, complete two-stage
Jaw / Impactor Crushing Systems, and an extended line of ancillary products.

Lippmann crushing equipment is available in stationary, skid-mounted, wheeled portable, or track-mounted configurations. All are built for rugged durability, ease of transportability, minimum set-up and teardown with superior features.


Lippmann • 3271 East Van Norman Avenue • Cudahy, WI 53110 USA
Phone: 1-800-648-0486 or 1-414-744-2565 • Fax: 1-414-744-8172
E-mail: sales@lippmann-milwaukee.com
Url:  http://www.swanwashing.com/
       http://www.crushingplant-china.com/

knightindustrial

Established in 1984, Knight Industrial Equipment has provided Bulk Material Handling Equipment and Turnkey Belt Conveyor Systems throughout the Southeastern United States as well as overseas in places such as Russia and South America. With modern facilities located at the Lakeland Florida Regional Airport, a quick response to our customers needs is easily accomplished with our company aircraft.


Our in-house engineering capability utilizes the latest techniques in computer aided design has allowed us to provide quality systems including large belt conveyor projects, aggregate plants, concrete plants, process systems and others on a turnkey, design and install. Our success is based on the simple principle that we are here to service our customers on a long-term on-going relationship basis. Our repeat customers over the years are our best evidence that we will provide quality service. From small projects, product sales, parts and service to the multi-million dollar projects, our goal is to insure that the confidence placed in us by our customer is justified on each and every transaction.

KNIGHT INDUSTRIAL EQUIPMENT
3701 Airfield Drive West
Lakeland FL 33811
Ph: 863.646.2997
Fax: 863.647.2745
General Product info: info@knightindustrial.net
System Inquiries: rknight@knightindustrial.net , rfoucher@knightindustrial.net
Url:  http://www.chinacuttingmachine.com/
       http://www.swanwashing.com/

genequip

INTEGRITY: We are committed to treating everyone in the organization, our stockholders and customers alike, with dignity and respect. To be truthful and candid, keep our promises and deliver on our commitments.

ATTITUDE: We are passionate about what we do, we are driven to excel and we never tolerate indifference.

HONESTY: We expect everyone to have a genuine commitment to the truth and we will not mislead, overstate or misrepresent.

TEAM WORK : We are committed to interdepartmental team participation which results in better ideas, better decisions and smoother, faster implementations.

VALUING CUSTOMERS : Our products and services are sold and supported with the goals and needs of our customers in mind. Customer focused repeatable processes yield superior quality, delivery and cost that satisfy our customers beyond their expectations.

Corporate Headquarters
General Equipment & Supplies
4300 Main Ave
Fargo, ND 58103
800-437-2924
Local: (701)282-2662
Fax: (701)364-2190
Url:  http://www.crushingplant-china.com/
       http://www.chinacuttingmachine.com/

excelfoundry

Excel Brass & Machine was established in 1929 and originally located in central Pekin, Illinois. The small company specialized in manufacturing small brass bushings and fittings. In the 60’s, the company was purchased by the Pieschke Family of Michigan, They sent their new son-in-law, Merrill Parsons, and his very young family to Pekin to manage the company. In the early 70’s, Mr. Parsons purchased the company along with 200 acres southwest of Pekin where he established the present location on Wagonseller Road. He also changed the company name to Excel Foundry & Machine as he focused on the production of bronze wear parts for the active mining industry in the region. During the 70’s, mining companies in the Midwest were desperate to keep their draglines and stripping shovels running but had difficulty securing replacement parts from the original equipment manufacturers. From this experience, Excel forged the business model that still exists today.

Call us! +1 309 347 6155
Toll Free 800 523 9129
Url:  http://www.swanwashing.com/
       http://www.crushingplant-china.com/

portablescreen

McCourt & Sons Equipment, Inc is the exclusive Texas based dealer representing the heavy equipment manufacturing industry leaders; McCloskey International, Superior Industries, and Scarab Manufacturing.

Established in 1997, and with over 65 years of combined industry experience, McCourt & Sons Equipment, Inc continues to proudly serve customers throughout Texas, Arkansas, Louisiana, Oklahoma, New Mexico and beyond.

McCourt & Sons Equipment, Inc.'s diversified portfolio of new and heavy equipment, quality service and product support, rental equipment, and spare parts availability attributes to our continued delivered success at meeting customer requirements within the crushing, screening, conveying, organic and recycling, environmental clean up and grinding markets.


McCourt & Sons Equipment, Inc
5141 Hwy 71 West
La Grange, TX 78945
Tel: 979-242-5298
Toll Free: 1-888-838-9252
Fax: 979-242-5292
Email: sales@portablescreen.com
Web: http://www.chinacuttingmachine.com/
         http://www.swanwashing.com/

excelmach

Excel Machinery, Ltd., located in Amarillo, Texas, serves markets internationally. We manufacture
everything from crushers to conveyors and portable screening plants. And all the related parts and
control packages. Excel Machinery, Ltd was one of the first companies to manufacture portable
crushing plants designed to meet the recycling needs of the construction industry. We have established
a reputation for quality, quick customer response, and practical expertise in rapidly bringing to the market
new products and technologies.

Mission Statement
Our mission is to provide our external and internal customers with quality products, services, and
solutions that meet or exceed their expectations, through a process of continuous improvement.
We recognize that our existence depends on our customers.

We will demand a fair return for our products, services, and solutions. Without profits we are not able
to sustain the innovation and technology our customers have come to expect.

We will strive for the highest possible level of moral and ethical standards. Without our integrity we can
not be a positive influence on our families, community, or industry.

We will sustain a work environment built on cooperation, trust, and respect, where win-win
relationships, equity in economic compensation, and service and contribution to our community,
suppliers, customers, and employees are the norm.

Email us at sales@excelmach.com
Amarillo Office
P.O. Box 31118, Amarillo, TX 79120
(Physical Address: 12100 I-40 East)
Phone:
1-800-858-4002
806-335-1553
Fax: 806-335-3949
Url:  http://www.crushingplant-china.com/
       http://www.chinacuttingmachine.com/

crushers4sale

Crushers 4 Sale Ltd is a worldwide supplier and procurement specialist of new & used equipment, supplying machinery into quarry related markets and also into the recycling industries for the reclamation and re-use of second generation materials.

Crushers 4 Sale Ltd also specialises and supplies a comprehensive range of excavator attachments from the worlds most innovated and respected market leaders.

30 Tullyodonnell Road
Dungannon, Co. Tyrone
Northern Ireland. BT70 3JE
Contact Us for an Updated Stock List
Tel: +44 (0) 28 8775 9394
Fax: +44 (0) 28 8775 9461
Mobile: +44 (0) 7710 058 066
Email: sales@crushers4sale.com
Url:  http://www.swanwashing.com/
       http://www.crushingplant-china.com/

homerecycling

It all began in 2004 when Chris Hasling, after acting as a community recycling volunteer and as a compost advisor in the South East, realised that more people would start recycling and existing recyclers recycle more if it was made easier, tidier and even stylish.

Being single at the time it seemed an easy decision to sell his house and buy in stock of recycling bins, can crushers and other tools to make recycling easier. Chris set up in his parents' double garage in the North East - which, understandably, they weren't very impressed with!

Within months he had run out of space and bought a couple of 40' shipping containers to hold more stock. By the middle of 2005 larger premises were needed and the company moved to Sowerby Bridge.

Now employing 6 people, the company operates from a stunning glass-roofed, converted Sunday School overlooking the Rochdale Canal and has provided over 40,000 recycle bins and can crushers to make recycling easier.


By eMail info@homerecycling.co.uk
By Telephone
08456 123 191 (Local Rate)
or, if you prefer a normal landline:
01422 835439 - 2 lines
0560 3427181 - single line
By Fax 08456 123 292 (Local Rate)
By Post Home Recycling Ltd
Bolton Brow Gallery
Bolton Brow
Sowerby Bridge
HX6 2AG

westconuk

Westcon Equipment started life in 1982 with the aim of providing high quality equipment to the arboriculture industry. American built Rayco Stump Cutters were the first franchise and they soon became UK market leaders.

Rayco Europe was set up in the late 80’s to establish a dealer network throughout Europe for the Rayco range of products.

Then in 1993 Westcon expanded into the composting and wood recycling industry by taking on the JENZ shredder range. With the recycling industry booming we now offer a complete range of equipment to turn compost oversize into biomass. This includes shredders, chippers, woodcrackers and Terra Select trommel screeners.

The Terra Select range also includes the Windsifter that can remove plastic and paper with the option of metal and stone removal.

Wood recycling is another important area and Westcon offer FORUS slow speed shredders and the JENZ high-speed shredders for volume reduction, chipboard production or biomass fuel. With biomass now an important fuel for the future Westcon also offer the JENZ range of PTO and self-powered machine fed chippers.

To support all our customers Westcon offer a complete after sales service, technical advice, a large stock of spare parts available next day and service engineers available to keep the machines running.


Neil Bond
South of England and EIRE
07931 500201
Nick Rumsey
Midlands, South West and
South Wales
07831 139802
Richard Newton
North of England and North Wales and Northern Ireland
07984 173163
Fraser Robb Scotland 01360 660688
Parts
David Foster
01258 859101
Url:  http://www.chinacuttingmachine.com/
       http://www.swanwashing.com/

mastermagnets

Master Magnets Ltd is the UK's No.1 manufacturer of magnetic separation equipment and is renowned for a wide range of Products and Services.


In 2003 Master Magnets Ltd acquired Integrated Recycling Systems Ltd and in 2005, acquired Metal Detection Ltd. The acquisitions resulted in Master Magnets enhancing their services, product range and capabilities to include a full range of separation, size reduction, feeding and metal detection equipment.
We have agents positioned across the globe enabling Master Magnets to provide industrial magnetic solutions to worldwide markets and our services are known to be some of the best in the world. From our pre-sales services, which can include site evaluations and product sample testing, through to the commisioning services that can be carried out on our existing customers machines, Master Magnets will endeavour to provide helpful services throughout the entire sales process to ensure a high level of customer satisfaction.
The future looks bright for Master Magnets as we continue to trade and grow world-wide. Our design and engineering departments now have the knowledge and expertise to solve any application presented to us from around the world.


Tel:+44 (0)1527- 65858
+44 (0)1527- 65868
Monday to Thursday
8:45am - 5:00pm GMT
Friday
8:45am - 12:45pm GMT
Name & Registered Office:
MASTER MAGNETS LIMITED
HIGHCROFT HOUSE
81-85 NEW RD RUBERY
BIRMINGHAM
WEST MIDLANDS B45 9JR
Company No. 01303706

atkequipment

ATK can save you money on your waste disposal costs and ensure your company adheres to the latest changes in landfill legislation.
We offer a full range of waste processing machinery including Vertical Balers, Horizontal Balers, Compactors, Confidential Shredders, Industrial Shredders, Can Crushers, Incinerators, Drum Crushers and Bottle Crushers. We are fully SAFECONTRACTOR approved and offer a full after sales service tailored to suit your requirements
We are also licensed waste carriers and brokers so we can offer a free of charge collection service for your processed waste.

Byron House,
Seaham Grange Industrial Estate,
Seaham,
SR7 0PY
T: +44 (0)845 603 6764
F: +44 (0)191 523 7915
E: info@atkequipment.co.uk
Url:  http://www.chinacuttingmachine.com/
       http://www.swanwashing.com/

arcelormittal

ArcelorMittal Mines Canada is one of Canada's leading suppliers of iron ore to steel markets around the world, generating some 40 per cent of Canada’s total production. As both a mining and primary processing company, it operates extensive facilities in the Province of Quebec.

ArcelorMittal Mines Canada operates two large open-pit mines: one in Mont-Wright, the largest of its kind in North America, and one in Fire Lake. Also at Mont-Wright, the ArcelorMittal Mines Canada mining complex includes a concentrator, massive workshops and an automated concentrate train loading system. The site is linked by Company rail to the Port-Cartier industrial complex, which comprises the pellet plant, storage areas and port facilities for shipping.

ArcelorMittal Mines Canada produces some 15 million tonnes of iron ore concentrate and over nine million tonnes of iron oxide pellets annually.

Recognized for the excellence of its products, the skills of its 2,000 talented employees and its leadership in the industry, ArcelorMittal Mines Canada is a wholly-owned subsidiary of ArcelorMittal, the world's number one steel company, with 320,000 employees in more than 60 countries.

ArcelorMittal Mines Canada
1801 Mcgill College,
Suite 1400
Montreal (Quebec) H3A 2N4
Canada
Tel.: 514 285-1464
Fax.: 514 285-1978
Url:  http://www.crushingplant-china.com/
       http://www.chinacuttingmachine.com/

westpromachinery

Since 1985, Westpro has been providing customers worldwide with the latest technology incorporated into every quality Westpro product. Throughout the years, Westpro's product line has grown to include Agglomerators, Attrition Scrubbers, Clarifiers, Flotation Machines, Grinding Mills, Lime Slaking Systems, Rotary Dryers, and Thickeners.

Westpro has equipment installed throughout the world in areas such as Bolivia, Peru, Chile, Guayana, Mexico, Africa, Siberia, Canada, and the United States.

Westpro's commitment to excellence has established it as a leader in the supply of quality machinery at the most reasonable prices available. Streamlined production allows for prompt delivery times of 6-8 weeks on most products. If you need quality machinery with the latest technology, the best price, and the quickest delivery then Westpro is your answer. Contact Westpro today, they would be pleased to discuss your requirements.

Westpro Equipment Company
2255 Glades Road, Suite 324A
Boca Raton, Florida 33431
Tel: (561) 395-6955
Fax: (561) 395-7760
Url:  http://www.swanwashing.com/
       http://www.crushingplant-china.com/

balers2

Baler Options’ Head Office is based in Alfreton, Derbyshire. Complimenting this site is a national network of service engineers who ensure you receive the greatest possible product support available.

The service that Baler Options provides is based upon more than 25 years experience within the Waste management and Recycling industries, with expertise gained as a waste producer, disposer and recycler.

Our aim is to ensure that your organisation recycles as much as financially possible, by using the most reliable and suitable equipment.

Baler Options undertake with your co-operation and information such as type of materials and waste disposal costs, a detailed waste survey. Subsequently we will provide you with a detailed recommendation to suit your requirements and budget.

General Sales & Enquiries
0845 458 2119
E-mail info@baleroptions.co.uk
Customer Support
0870 458 7119
E-mail support@baleroptions.co.uk
Postal Address
Baler Options Ltd, Unit D2, Motorway Link Industrial Estate, Alfreton, DE55 7RA
Url:  http://www.chinacuttingmachine.com/
       http://www.swanwashing.com/

cotton

The National Cotton Council of America's mission is to ensure the ability of all U.S. cotton industry segments to compete effectively and profitably in the raw cotton, oilseed and U.S.-manufactured product markets at home and abroad.

National Cotton Council of America
1521 New Hampshire Ave NW
Washington DC 20036-1205
(202) 745-7805
(202) 483-4040 Fax
Url:  http://www.crushingplant-china.com/
       http://www.chinacuttingmachine.com/

mbcrusher

MB, Meccanica Breganzese, a Vicenza company, world leader in the production and sale of jaw-action bucket crushers has, in just a few years, become one of the most important enterprises in the earth moving industry.

At the time of its establishment the company took a gamble by opting to diversify within the sector, by specialising in the production of a single product type: the bucket crusher.

This gamble turned out to be a winner and it marked the beginning of a trend that, as a result of the company’s policy of continual innovation and technological research, has taken MB products to levels of excellence that are recognised worldwide.

MB has always firmly believed in the importance of ongoing interaction with the public and in providing the right solution for mobile jaw crusher customers' needs. They have achieved this by increasing product performance and by offering products that consistently meet user expectations.

MB AMERICA, INC.
190 W Huffaker Ln. #402
Reno, NV 89511
Fax: +1 755 455 4196
Toll-Free: 1-855-MB-CRUSH
Url:  http://www.swanwashing.com/
       http://www.crushingplant-china.com/

taining

Taining Machine Industries Co., Ltd, was founded in 1968, and specializes in various winding machines including card winders, automatic mini thread winders, balling winders and automatic high speed cross cone winders. Our service is based on commitment, professionalism, innovation and quality. This kind of commitment pushes us constantly to research & develop new products so that we can maintain our leading edge in innovative manufacturing.

With a solid reputation that spans 40 years, Taining Machine Industries Co., Ltd has manufactured more than 10,000 sets of various winding machines. We are confident that our promptness, quality manufacturing & customer service will meet your high standards no matter where you are


Factory:
Address : No. 35, Lane 734, Sec. 3, Sha Tien Rd.Ta-Tu, Taichung County, Taiwan
Tel : 886-4-26991213
Fax : 886-4-26996533
E-mail : tatuyu@ms33.hinet.net
Url:  http://www.chinacuttingmachine.com/
       http://www.swanwashing.com/

omr-srl

O.M.R. S.r.l. since 1978 designs and builds Winding Machines for textile sector.
During these years acquired experience and know-how allowed to expand its working also in sectors not related to the original one.

Advice, project, realization, testing, installation are the business run which becomes "keys into Client's hands". O.M.R. mission continues with a capillary, timely and qualified post-sale assistance.

Sede e divisione plastica:
Largo delle Industrie, 4/5
24020 Torre Boldone (Bg)
Tel: 035 343457 (2 linee r.a.)
Fax: 035 360354
e-mail: omr@omr-srl.com
Divisione meccanica:
Via G. Galilei, 13
24060 Torre de' Roveri (Bg)
Tel: 035 582484
Fax: 035 4521710

disposacone

Peel wax paper off adhesive & stick DisposaCone to concrete, asphalt, wood, metal, glass, etc.
Holds up to 4 days in wind and rain!
High visibility fluorescent red-orange
Engineer Grade Reflective tape
Folds flat and fits most motorcycle saddlebags or under most vehicle seats
Recyclable

DisposaCone,
a division of Vanguard ADA Systems
20628 Broadway Ave
Snohomish, WA 98296
(360) 668-5700
FAX (425) 212-2555
info@disposacone.com

skinnertank

Skinner Tank Company (STC) focuses primarily on building new, welded steel, above ground, liquid storage tanks per the requirements of the American Petroleum Institute's Standard 650 (API 650). API 650 establishes minimum requirements for material, design, fabrication, erection, and testing of vertical, cylindrical, above ground, closed-top, open-top, and floating-top, welded carbon steel, and welded stainless steel storage tanks.

STC also has the expertise to build AWWA D100 water tanks as well as NFPA 22 firewater tanks. While the petroleum industry is vital to our existence, we are also heavily involved with industries such as liquid fertilizer, liquid asphalt, liquid feed products, food products, drinking water (for human and livestock consumption), firewater, waste water, process water, alternative fuels (such as Etholnol and bio-diesels), and a wide variety of other specialized chemicals.

While STC can build almost any size of tank, we are most competitive building tanks between 1,000 barrels and 100,000 barrels in the petroleum industry and between 50,000 gallons and 5,000,000 gallons for all other industries.

Skinner Tank Company (STC)
PO Box 338
Yale, OK 74085

918.387.2481
800.227.8265
918.387.4121 (FAX)
tanks@skinnertank.com

n-tec

n-TEC AS is a start-up company founded in 2001 by people from different horizons - industrialists and researchers.

Our goal is to offer to the market high quality carbon nanotubes, carbon cones and related carbon nanomaterials.


Tel: + 47 974 14 000
Fax: + 47 225 57 520
Postal and visiting address:
Sommerrogaten 13-15
NO-0255 Oslo
NORWAY
E-mail:
For general information: contact@n-tec.no
For sales: sales@n-tec.no
For quality / technical matters: quality@n-tec.no

carloschulpen

NV Intracon exists since 1987 and is specialised in crushing and screening for both quarries and recycling of concrete and building materials.

NV Intracon has mainly four activities:

Production of water defence stones and pellets for the asphalt and concrete batching plants in a lime stone quarry in Sprimont (Belgium). We are certified for the Dutch Rijkswaterstaat (KOMO -certificate) and for the production of pellets for the Belgian railways.
Contract crushing in quarries with mobile crushers and screens, mainly in the Benelux and Germany. We have many references and a large experience in this field.
Buying and selling new and used crushing and screening plants, mainly mobile machines. In this field we have many references all over the world. Thanks to our long experience in this field we are able to find quickly the most suitable machine (new or used) for your application.
Advice and planning of new production installations for the production of pellets with both new and secondhand machines.

N.V. Intracon
Spekstraat 2
3631 Maasmechelen
Gsm: +32 (475) 414136 Fax: +32(89)77.25.40
Email: info@carloschulpen.com
BTW: BE 0428.162.948
Url:  http://www.swanwashing.com/
       http://www.crushingplant-china.com/

marsmanltd

In the year 1986 started in Industrial Area at Ambad, Nashik (Maharashtra state in India) as a small scale unit manufacturing earthmoving and mining equipment under brand name of “Kamal Road Roller” and “Shaktiman” brand mining equipments. We have maintained a steady growth from starting itself due the quality and productivity of equipments. Thanks to the overwhelming demand for “Kamal” and “Shaktiman” earthmoving and mining equipments due to the non-compromise quality and productivity, in the year of 2000 a new manufacturing plant with almost modern sophisticated amenities has started under name of “MARSMAN INDIA LTD.”


MARSMAN secondary Horizontal Shaft Impactor (HSI) had been developed in 1996 Spanish colaboration. Its unique features are to produced high quality cubical shape stone aggrigates material with high productivity. Secondary Horizontal Shaft Impactor (HSI) having production capacities of 50 to 200 TPH, which is an ideal solution to produce high quality cubical aggrigates. The company has a wide network of marketing system to carry out sales and after sales service. We are registered members of International Trade Promotion Organization (ITPO), Engineering Export Promotion Council (EEPC) and Indo-German Chamber Of Commerce (IGCC).

We manufacture various products like mobile jaw crushers, mobile impact crushers and its allied equipments like Rotary / Vibrating Screens, Grizzly Feeders, Hoppers, Conveyor Systems etc. There are various sizes of Jaw Crushers having production capacity ranging from 6 TPH to 500 TPH capacities. The company has got its market on National level and International level through its dealers and agents spread throughout the country and abroad. A considerably large number of machines are working satisfactorily throughout the country as well as abroad. The company has a large number of satisfied customers on its list. Now the annual turnover of the company is in millions of rupees. The company has been exporting its products to Gulf Countries, Asia, Africa.

Head Office :
Marsman India Limited,
Plot no. N-16, MIDC
Industrial Area, Ambad, Nasik- 422010
Tel No.: 0253 2382940,
Fax : 0253 2380272
E-Mail : sales@marsmanltd.net
Website : www.marsmanltd.net

Works:
Gat. No. 581 / 582,
At Post Janori,
10th Mile,Ozar,
Mumbai - Agra Road,
Nashik - 422 206.(M.S.) INDIA.
Ph.: 02557-275210.

elichem

We are a manufacturer and distributor of two-part resin systems.

We have built a solid worldwide distribution network specialising in the Electronic encapsulation, General / Civil Engineering, Power Generation / Reticulation and Mining / Quarrying markets. Our activities extend to many other industries, too numerous to mention.

We supply polymer solutions for repair and maintenance applications.

Our technology covers polyester, polyurethane and epoxy casting resins, clear casting resins, gravel bonding resins, doming resins, epoxy putties, epoxy adhesives and ceramic-epoxy coatings.

We have over 35 years industry experience solving problems in the toughest and most aggressive environments on earth.

Eli-Chem is the home Eli-Flex conveyor belt and rubber repair resin.

If you have a problem, the chances are we have the resin solution.

Eli-Chem Resins U.K. Limited
Astra House
The Common
Cranleigh
Surrey, GU6 8RZ
United Kingdom

Phone: +44 (0) 1483 26 66 36 or 37
Fax: +44 (0) 1483 26 66 50
Email: sales@elichem.co.uk
Url:  http://www.swanwashing.com/
       http://www.crushingplant-china.com/

constructionmachinery

As Kubota main dealers based in West Wales, UK we pride ourselves on supplying quality new and used machinery at a competitive price. With our reputation of retailing quality machinery and the ability to deliver anywhere in the UK and Europe we are a top choice for all your Construction Machinery needs.

All our used machinery is refurbished and serviced to an incredibly high standard by our team of highly experienced engineers, ensuring that it is ready for work on arrival.

We also specialize in other brands such as Barford/Terex, Thwaites, Bomag,Airman, JCB, easi-Loader, Neuson and Terex, so whatever your preference of machine please give us a call and see what we have to offer.

Our address:
Tegfan Garage,
Llanllwni,
Pencader,
Carms,
SA39 9DX.
Phone:
Tel: 01559 395235
Mob: 07776 235480
Fax: 01559 395495

miningandconstruction

For nearly 150 years, the name Sandvik has been synonymous with quality. In our quest to provide total solutions for our customers, we have invested heavily in research and development of new products and acquired many strong brands. Each has been integrated seamlessly into the offering, creating unique synergy and value for our customers in mining and construction industries.

Sandvik Mining and Construction
SE-811 81 Sandviken
Sweden
Phone: +46 (0)26-26 20 00
Fax: +46 (0)26-26 02 22
info.smc@sandvik.com
Url:  http://www.swanwashing.com/
       http://www.crushingplant-china.com/

redrhinocrushers

We are always just a phone call away from helping you with your repairs and spares requirements.
Our dedicated and specialist mechanics are able to provide professional repairs to your crusher and ensure that you quickly get your crusher back out and crushing again as quickly as possible.
You can rest assured we use only genuine parts fitted by our factory trained Rhino engineers.
Why not take advantage of a special rates and send your crusher over to the factory for a service and inspection.

Alma Park Industrial Estate,
Grantham,
Lincolnshire,
NG31 9SE
T: +44 (0) 1476 590790
F: +44 (0) 1476 593821
info@redrhinocrushers.com
Url:  http://www.chinacuttingmachine.com/
       http://www.swanwashing.com/

adplus

Our skilled and motivated people bring innovative thinking, energy, and professionalism to consistently supply superior products and services to the aggregate quarrying & mining industry.

We deal directly with quarry operators as well as through distributors, to further expand our market coverage.

We supply jaw and cone crusher parts suitable for Allis Chalmers, Boliden Allis, Jaques, Kawasaki, Kemco, Kobelco, Kue Ken, Kurimoto, Lokomo, Nordberg, Nakayama, Otsuka, Pegson, Svedala, Sandvik, and Symons.

21 Toh Guan Road East
#04-01 Toh Guan Centre
Singapore 608609
Contact Person: Sebastian Lua
Telephone: +65 6894 8816
Fax: +65 6894 2318
Email: sebastian@adplus.com.sg
Utl:  http://www.crushingplant-china.com/
       http://www.chinacuttingmachine.com/

bavcrushers

BAV Crushers design and manufacture a range of concrete, brick and rubble crushing products available as alligator excavator attachments, digger bucket crushers, or mobile micro and mini tracked crushers.

We have products suitable for crusher hire operations, as well as equipment to help you work profitably on a wide range of contracting tasks, such as the demolition and dismantling of concrete structures or the on site recycling of domestic rubble from household building and landscaping.

Rubble and concrete crushing and recycling waste can reap many rewards such as:

Produce usable aggregate and fill from waste rubble
Reduce vehicle movements on and off site
Avoid transportation costs and hassle
Save money on costly skips
Increase scrap value by crushing reinforcing metal clean of concrete
Avoid increasing environmental taxes
All BAV products are designed to help you comply with the Proximity Principle, which states that wherever possible, all waste should be processed at the point of origination.

All BAV products are designed and manufactured by us in our Rugeley production facility in Great Britain.

Email: sales@bavcrushers.co.uk
Tel: 01889 503020
Fax: 01889 503021
Address:
BAV Crushers Limited
Unit 2
Key Point
Towers Business Park
Rugeley
Staffordshire
WS15 1LH
UNITED KINGDOM
Url:   http://www.swanwashing.com/

baumaschinen-koenig

For more than 40 years we are active in purchasing and selling of
jaw crushers
impactors
cone crushers
screening plants
construction machines
on a global scale. Our expertise ensures a comprehensive guidance all over the world as well as on location.

Am Waldwinkel 2
D-34414 Warburg
Phone: (+49) 5641 - 74 88 10
Fax: (+49) 5641 - 74 88 120
Skype: Kingcrusher or Kingcrusher2
E-Mail: koenig@baumaschinen-koenig.de
Url:  http://www.crushingplant-china.com/
       http://www.chinacuttingmachine.com/